We start each one of our headlight builds for the Ford Fusion off with brand new OEM assemblies, or brand new Mondeo replicas.
While this may make us a little more costly than the other guys, or more than you are planning, this also allows us to provide headlight services that are literally 100% brand new.
We strive to provide only the best services around, and in doing such, we believe that starting with anything less than brand new, will keep us from providing that service to our customers.
If you want to provide us with your own assemblies, or another set of assemblies that you may have, please visit our "Send Your Own" options for headlights. This option removes the cost of needing new assemblies.
This option is based on the European Mondeo. These headlights are a replica of the Mondeo's top tier, LED based assemblies. The replicas use a generic, H7 based bi-xenon projector, which provides a decent amount of light for what they are. You can always stick with the projectors that are included, or opt for the Morimoto Mini D2S 4.0 bi-xenon projector upgrade, which will improve the light output even more.
These assemblies use an LED high beam, which provides a decent amount of light output. They are a supplement to the main projectors bi-xenon capability, and will improve output by a good margin.
These assemblies also implement a dual brightness LED DRL along the bottom of the headlight housing. This setup will work in low output mode only, and the DRL will not shut off, unless you opt in for the Switchback adapter. The switchback adapter is a plug in adapter, that you connect to the cars OEM headlight plug, and then connect to the headlight itself. There will be a wire that will need to be connected to a fuse that has power as soon as the key is turned forward, for true DRL function, which will reduce brightness to half power when the headlight turn on.
These assemblies also implement sequential LED turn signals. These turn signals greatly improve the visibility over the OEM turn signals. However, with that said, without the above mentioned Switchback adapter, the turn signals lose some of their visibility. This is because there is nothing on the North American based Fusions that tell the DRL lights to turn off when the turn signal is activated. The Switchback adapter has all the stuff needed included and wired and ready to go, that make this a complete plug and play process.
For options outside those listed in the choices above, please, feel free to email us to set you up with custom price quotes!
If RGB halos and/or Demon Eyes are selected, you will need the Morimoto XBT Bluetooth controller to operate the unit. This is a required option, if anything RGB is chosen.
Labor/shipping for failed demon eyes and/or failed halo warranties are not covered under our normal 6m warranty on installation, as these items have a potentially higher failure rate, and it is purchasers understanding and acceptance of this. New parts can be supplied to you, and we will help walk you through repairs, or parts can be sent here (at owners expense) and repaired for a minimal fee. Replacement parts will be covered under warranty for any and all warranty related issues.