We start each one of our headlight builds for the Ford Fusion off with brand new OEM assemblies, or you can send in your own assemblies. If you want to provide us with your own OEM headlights, please choose "Yes" above where it asks if you are sending your own assemblies. This option removes the cost of needing new assemblies.
If sending your own, the assemblies will get a full wetsand and polish when completed to remove as many imperfections as possible, and a layer of high strength UV sealant will be applied, to bring them back to looking like brand new.
While this may make us a little more costly than the other guys, this also allows us to provide headlight services that are literally 100% brand new, or appear to be 100% brand new.
This option is based on the OEM North American Fusion headlights. These headlights are the only option available for the 2013-2016 Ford Fusion from the factory. These assemblies use a basic, H11 low beam only, halogen projector, which provides mediocre light output. You can always stick with the projectors that are included, or opt for the Morimoto Mini D2S 4.0 bi-xenon projector upgrade, which will improve the light output dramatically.
This option is for those who wish to retain the OEM projector, or for those who want to upgrade to a single Morimoto Mini D2S 4.0 Bi-Xenon projector. If you prefer to have the dual projector setup, that can be seen here - Ford Fusion (2013-2016) OEM Dual Projector Headlight Retrofitting Service
The single projector upgrade, is a simple look, not over the top, and allows for the full use of the OEM high beam as well, so you will retain OEM functionality if you stay with the OEM low beam projector. If you choose the HID Projector upgrade, however, you will have an extra high beam coming from the projector itself, doubling the amount of light output.
This option is a customer favorite, due to the relatively low cost, OEM look and functions, and ability to add additional LED accent lighting in the high beam location (only recommend this if the HID projector option is chosen).
For options outside those listed in the choices above, please, feel free to email us to set you up with custom price quotes!
If RGB halos and/or Demon Eyes are selected, you will need the Morimoto XBT Bluetooth controller to operate the unit. This is a required option, if anything RGB is chosen.
Labor/shipping for failed demon eyes and/or failed halo warranties are not covered under our normal 6m warranty on installation, as these items have a potentially higher failure rate, and it is purchasers understanding and acceptance of this. New parts can be supplied to you, and we will help walk you through repairs, or parts can be sent here (at owners expense) and repaired for a minimal fee. Replacement parts will be covered under warranty for any and all warranty related issues.